NanoPlas, Inc.

Tiny Solutions to Huge Problems
Efficiency through Technology

Release Coatings

Corrosion Control

Cleaners/Degreasers

Purging Compounds

NCI Packaging Film/Bags

NanoMoldCoating

Corrosion Control

Cleaners/Degreasers

Purging Compounds

NCI Packaging Film/Bags

OEM / Private Label

Contract Packaging

Product Engineering / Formulation Assistance

HC-Heat Cure	HCF-Heat Cure FDA Compliant	QC-Quick Cure	QCrb-Quick Cure Rubber	QCsi-Quick Cure Silicone
• Excellent Release	• Excellent Release	• Excellent Release	• Excellent Release	• Excellent Release
•Thermosets	•Softer than HC resulting in faster wear for harder or filled materials
•Thermoplastics –Engineering Grades –Commodity Grades	•Thermoplastics –Commodity Grades –Engineering Grades	•Thermoplastics –Commodity Grades –Engineering Grades	•Thermoplastics –Commodity Grades –Engineering Grades	•Thermoplastics –Commodity Grades –Engineering Grades
• Cure time 3-4 hours • Cured with hot air	• Cure time 3-4 hours • Cured with hot air	• Cure time 10-15 minutes • Cured by heating mold	• Cure time 10-15 minutes • Cured by heating mold	• Cure time 10-15 minutes • Cured by heating mold
• Application on an unheated surface	• Application on an unheated surface	• Application on a heated surface	• Application on a heated surface	• Application on a heated surface
• Application best when not in the press and on an unheated mold	• Application best when not in the press and on an unheated mold	• Touch up easily performed while tool is in the press and hot	• Touch up easily performed while tool is in the press and hot	• Touch up easily performed while tool is in the press and hot
• Limited ability to bond to plated or pretreated surfaces	• Limited ability to bond to plated or pretreated surfaces	• Bonds well to plated or pretreated surfaces	• Bonds well to plated or pretreated surfaces	• Bonds well to plated or pretreated surfaces
• Multiple coats are possible	• Multiple coats are possible	• Multiple coats are possible	• Multiple coats are possible	• Multiple coats are possible
• Solvent Carrier	• Solvent Carrier	• Water Carrier	• Water Carrier	• Water Carrier
• Polymer Film	• Polymer Film	• Thermoset Polymer Film	• Thermoset Polymer Film	• Thermoset Polymer Film
• Up to 500K Cycles	• Up to 500K Cycles	• Up to 500K Cycles • May require more frequent reapplication than HC or HCF	• Up to 500K Cycles • May require more frequent reapplication than HC or HCF	• Up to 500K Cycles • May require more frequent reapplication than HC or HCF
• Temperatures up to 1000°F	• Temperatures up to 1000°F	• Temperatures up to 500°F	• Temperatures up to 500°F	• Temperatures up to 450°F
Available in 5ml, 15ml, 25ml, 50ml, and 500ml packages- sold in kits (NanoMoldCoating, MoldCoatingRemover, MicroFiber Cloths, MicroFiber Swabs, dropper, pump sprayer)	Available in 5ml, 15ml, 25ml, 50ml, and 500ml packages- sold in kits (NanoMoldCoating, MoldCoatingRemover, MicroFiber Cloths, MicroFiber Swabs, dropper, pump sprayer)	Available in 2oz and 8oz pump spray bottles- sold in kits (NanoMoldCoating, MoldCoatingRemover, MicroFiber Cloths, MicroFiber Swabs, pump sprayers)	Available in 2oz and 8oz pump spray bottles- sold in kits (NanoMoldCoating, MoldCoatingRemover, MicroFiber Cloths, MicroFiber Swabs, pump sprayers)	Available in 2oz and 8oz pump spray bottles- sold in kits (NanoMoldCoating, MoldCoatingRemover, MicroFiber Cloths, MicroFiber Swabs, pump sprayers)